Nexo DTD-T System Processor

$2,232.53 INC GST NZD

SKU: DTDTU Categories: , ,


Nexo DTD-T System Processor


The DTD delivers advanced speaker control processing taken from the NEXO NXAMP in a compact, rack-mounting device. Providing sophisticated control over crossover, EQ and time-alignment along with speaker protection, the DTD is very easy to use, with automatic amplifier sensing and simple Sub Gain, Main Gain and Crossover Mode control available directly from the front panel (DTD-T touring version). The DTD combines efficient speaker processing with a flexible range of inputs including stereo balanced analog inputs, an AES input and a USB port enabling direct driverless audio playback from laptops, etc. An optional DanteTM input is also available.

DTD uses state-of-the-art audio processing to deliver high- precision EQ and Linear Acoustic Phase algorithms, phase- compatible with all PS and LS cabinets, along with other speakers in the NEXO range. High-end AD and DA converters and 64-bit/96kHz processing ensure an analog in-to-analog-out dynamic range greater than 112dB, with distortion kept to under 0.001%.



Speaker controller for PS and LS series, providing digital processing from the NXAMP technology (Crossover, EQ, time alignment and speaker protection)
High-end Balanced stereo analogue inputs, AES input, USB input and optionally Dante
High-end balanced analogue outputs for PS (Stereo) and LS (mono sum)
Automatic Amplifier Sensing with no setting required from user
Simple control from the front panel (Sub Gain, Main Gain, Crossover mode) or advanced control using USB port


Sampling frequency and resolution 48/96 KHz, 64 bits internal processing precision
Signal delay Less than 1 ms (analog in to out) on flat setup, compatible with NXAMP latency
Frequency response 20 Hz to 20 KHz, /-0.5 dB (mains out), 20 Hz to 2 KHz /-0.5 dB (sub out)
Total harmonic distortion Less than 0.001% (mains out), less than 0.02% (sub out)
Dynamic range 112 dB (unweighted, mains out), 107 dB (unweighted, sub out)
Crosstalk / Channel separation -100 dB (1KHz)
Indicators Input signal/peak (green/red), amp in signal (green), speaker protect (yellow)
Display White backlight graphical OLED display 96 x 16 pixels
Switch and rotary knobs 3 position switch 2 x rotary knobs



Number of channels 2 electronically balanced analog inputs
Connectors 2 x XLR-F with link on XLR-M
Sampling frequency and resolution 96 KHz / 24 bits
Max. input level / Input impedance 22 dBU / 20 KOhms
Number of channels 3 electronically balanced analog outputs
Connectors 3 x XLR-M
Sampling frequency and resolution 48/96 KHz, 24 bits
Max. output level / Output impedance 22 dBU / 200 Ohms
Number of channels 4 floating electronically balanced high voltage analog inputs
Connectors 2 x 4 pole SP connectors
Sampling frequency and resolution 48/96 KHz, 24 bits
Max. input level / Input impedance 50 dBU (8000 Watts / 8 Ohms) / 364 KOhms
Number of channels 1 AES/EBU stereo digital input
Connectors 1 x XLR-F
Sampling frequency and resolution 44.1 to 96 KHz / 16, 20 or 24 bits
Number of channels 2 x Dantetm channels
Connector 1 x ruggedized RJ45
Sampling frequency and resolution 48-96 KHz / 24 bits
Type 2 channels of USB audio
Connector Female mini USB connector type B
Sampling frequency and resolution 48 KHz / 16 bits
Remote Control (DTD-T) Mini USB
Remote Control (DTD-T-N) Mini USB RJ45
Dimensions (W x H x D) 480 (W) x 44 (H) x 65 (D) mm, 1U
Weight 1.3 Kg
Power supply voltage 90 V – 240 V 50/60 Hz
Power consumption 20 W max
Heat dissipation (per hour) 20 Kcal max
Operating temperature range 0°C – 40 °C
Storage temperature range -20 °C – 60 °C


Additional information

Weight 1.3 kg