Description
Artistic Licence Micro-Scope 3c
Micro-Scope 3c is the latest generation of our classic DMX512 tester. Micro-Scope 3c vastly increases the functionality of the product by adding support for RDM.
The RDM (Remote Device Management) functionality is extensive. All parameters can be read and modified for both root and sub-devices. Sensors can be viewed with human readable units. The auto-patch feature allows all start addresses to be set to consecutive values based on fixture footprint.
It can operate as a rigger’s remote, a data analyser, an RDM programmer, a cable tester and even a data fixer. It is powered by an internal rechargeable battery with improved lifetime (in excess of 25 hours) and uses a bright backlit LCD screen.
Micro-Scope 3c is simple to operate. Switch on and you are immediately displaying received DMX512. Two key presses are all that is required to start flashing through the rig.
Forty preset memories, which contain individual level settings for all 512 channels, are available. Memories can be programmed by adjusting individual channels or by capturing received data. All data is held in flash memory, so you can be sure that your preferred settings will still be there when you get off the plane.
Features
- DMX512 output / RDM port
- DMX512 input port
- Get and Set RDM parameters including sub-devices
- Read RDM sensors
- Display RDM status messages
- Scope trigger
- Double-ended cable test
- Single-ended cable test
- Transmit DMX512 test patterns
- Set variable DMX512 transmit timing
- Read and display DMX512
- Fix mode: retransmit corrected DMX
- Transceive mode: transmit while reading
- Read and display signal timing
- DIP switch calculator
Features no longer supported
- MIDI input
- Fixture library
- Mic-Edit connectivity
Features that have not changed
- The original 9V PSU is used to charge and/or power Micro-Scope
- The original NiCd battery is used, but the battery charge life will be slightly improved
Specification
- Listing: CE, UKCA
- IP Rating: Indoor use
- Power: 300mW
- Charger Voltage: 90-250 VAC
- Input Voltage: 9 VDC
- Height: 45 mm
- Width: 125 mm
- Depth: 98 mm
- Net Mass: 0.54 kg
- Signal Connection: XLR5
- Rear Mounting: Single M4 x 20mm
- Universal power supply and case included
- Manufacturer: Artistic Licence
- Country of Manufacture: UK
