Triple E Track Drive Systems

Request a quote

Triple E
SKU: Trackmotors By Triple E Categories: ,


Triple E Track Drive Systems

From hand driven winches to our sophisticated yet easy to install electric motors – SDrive, TDrive and TracDrive – our motors can drive your loads of up to 400 kg.


Triple E track systems and custom designed equipment for use in the entertainment industry have a reputation for simple design, rugged construction and ease of installation.


All Triple E’s motor drive units are designed and manufactured in-house. We hold a large stock of standard units in both 230 V and 120 V, with 400 V 3 phase an easy switch we can make. If you need a motor for an unusual requirement we can design and manufacture a custom motor for your project in just a few weeks.

All our motor drive units are track mounted to reduce unnecessary clutter and hazards in precious wing space, they can also be wall mounted if required. All feature spring tensioners, variable speed and all are plug-and-play so there’s no need for an electrician to fit them.

With both wired and wireless control options, or integration into a show control system, Triple E motors can be used for all motorised track requirements.




The TRACDRIVE motorised system should be your first choice for operating a motorised track system as it offers so many advantages over more conventional systems with helically grooved winding drums. The off-the-shelf TRACDRIVE motor unit will power any length of track using polyester cord instead of steel wire rope making TRACDRIVE a silent system.

The TRACDRIVE motor system has also been designed to be a bolt-on extra and demonstrates Triple E’s attention to providing an answer to the problem of where to locate the track motor drive unit, on the track itself.

The TRACDRIVE motor unit, once bolted onto the end of the track and reeved with the operating cord, will operate with scenery or curtains including the rearfold system.

The TRACDRIVE unit will provide variable speed from crawl speed to 1.5m/s; the slim design of the unit makes it ideal where space is at a premium and specialist skills are not required for installation.



The TRACDRIVE motor is a three phase 0.4kW 100 Hz inverter optimised motor. This means that the motor can be wired in Star 415 volts ac or Delta 240 volts ac but it has to be driven via an inverter with its maximum output frequency set at 100 Hz and its V/F set at 100 Hz.

NOTE: This motor cannot be run direct on line.

NOTE: This motor is not continuous rated.

The TRACDRIVE system as delivered will accept all the connections for the motor and control (thermal trip & limits) circuits. The method of termination to the junction box can be hard wired via cable glands or the use of connectors depending on customer requirements. We can also incorporate an isolator on the junction box to allow safe isolation for maintenance of the whole track system.



Additional information

Weight 25 kg